Update Cisco Certification 300-135 TSHOOT real exam questions
Passtcert provides the most reliable training questions and answers to help you pass Cisco 300-135 certification exam. Passtcert have a variety of Cisco certification exam questions, we will meet you all about IT certification.Passtcert Cisco Certification 300-135 TSHOOT real exam questions are the best training materials on the Internet. It is the leader in all training materials. It not only can help you to pass the exam, you can also improve your knowledge and skills.
Share some CCNP 300-135 exam questions and answers below.
The Fault Condition is related to which technology?
A. BGP
B. NTP
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: A
What is the solution of the fault condition?
A. Under the interface Serial0/0/0 configuration enter the ip nat inside command
B. Under the interface Serial0/0/1 configuration enter the ip nat outside command
C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command
D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command
Answer: C
R1 and R2 OSPF neighbor.
Which two statements are true? (Choose two)
(Output from show ip ospf neighbors on 2 routers, one of them shows FULL/DR, the other FULL/-, you need to know how were they configured and will they exchange routes)
A. They are not neighbors
B. R1 (non-DR) will not update its routes to R2
C. Router R2 is configured with ospf point-to-point command (R2 is the router that shows as FULL/-)
D. They need to be configured as OSPF NBMA
E. R2 should be configured as stub
Answer: BC
Which command will limit debug output ppp authentication on serial 0/1 and serial 0/2?
A. debug condition interface range s0/1 -0/2
debug ppp authentication
B. debug condition interface s0/1 & 0/2
debug ppp authentication
C. debug int s0/1
debug int 0/2
debug ppp authentication
D. Debug condition interface s0/1
Debug condition interface s0/2
debug ppp authentication
Answer: D
How to check MTU of interface using ping? / How can you check the links mtu size with ping command?
A. ping 10.1.1.1 size 1501
B. ping 10.1.1.1 size 1500 df-bit
C. ping 10.1.1.1
D. ping 10.1.1.1 no-size
Answer: B
What is the solution of the fault condition?
A. Under the BGP process,enter the bgp redistribute-internal command
B. Under the BGP process, bgp confederation identifier 65001 command
C. Delete the current BGP process and reenter all of the commands using 65002 as the AS number.
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command.
Answer: D
The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: C
The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: C
What is the solution to the fault condition?
A. Under the interface Tunnel34 configuration enter the ipv6 ospf 6 area 34 command.
B. Under the interface Loopback6 configuration enter the ipv6 ospf 6 area 34 command.
C. Under the interface Serial0/0/0.34 configuration enter the ipv6 ospf 6 area 34 command.
D. Under ipv6 router ospf 6 configuration enter the redistribute rip RIP_ZONE include-connected command.
Answer: D
The certification of Cisco 300-135 exam is what IT people want to get. Because it relates to their future fate. Cisco 300-135 exam training materials are the learning materials that each candidate must have. With this materials, the candidates will have the confidence to take the exam. Cisco Certification 300-135 TSHOOT real exam questions in the Passtcert are the best training materials for the candidates. With Passtcert Cisco Certification 300-135 TSHOOT real exam questions, you will pass the exam easily.
The IT professionals and industrious experts in Passtcert make full use of their knowledge and experience to provide the best Cisco Certification 300-135 TSHOOT real exam questions for the candidates. We can help you to achieve your goals.With the arrival of the flood of the information age of the 21st century, people are constantly improve their knowledge to adapt to the times. But this is still not enough. In the IT industry, Cisco 300-135 exam certification is the essential certification of the IT industry.
Related article: http://300-070-real-qa.blogspot.com/2017/09/update-troubleshooting-and-maintaining.html
Share some CCNP 300-135 exam questions and answers below.
The Fault Condition is related to which technology?
A. BGP
B. NTP
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: A
What is the solution of the fault condition?
A. Under the interface Serial0/0/0 configuration enter the ip nat inside command
B. Under the interface Serial0/0/1 configuration enter the ip nat outside command
C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command
D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command
Answer: C
R1 and R2 OSPF neighbor.
Which two statements are true? (Choose two)
(Output from show ip ospf neighbors on 2 routers, one of them shows FULL/DR, the other FULL/-, you need to know how were they configured and will they exchange routes)
A. They are not neighbors
B. R1 (non-DR) will not update its routes to R2
C. Router R2 is configured with ospf point-to-point command (R2 is the router that shows as FULL/-)
D. They need to be configured as OSPF NBMA
E. R2 should be configured as stub
Answer: BC
Which command will limit debug output ppp authentication on serial 0/1 and serial 0/2?
A. debug condition interface range s0/1 -0/2
debug ppp authentication
B. debug condition interface s0/1 & 0/2
debug ppp authentication
C. debug int s0/1
debug int 0/2
debug ppp authentication
D. Debug condition interface s0/1
Debug condition interface s0/2
debug ppp authentication
Answer: D
How to check MTU of interface using ping? / How can you check the links mtu size with ping command?
A. ping 10.1.1.1 size 1501
B. ping 10.1.1.1 size 1500 df-bit
C. ping 10.1.1.1
D. ping 10.1.1.1 no-size
Answer: B
What is the solution of the fault condition?
A. Under the BGP process,enter the bgp redistribute-internal command
B. Under the BGP process, bgp confederation identifier 65001 command
C. Delete the current BGP process and reenter all of the commands using 65002 as the AS number.
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command.
Answer: D
The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: C
The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: C
What is the solution to the fault condition?
A. Under the interface Tunnel34 configuration enter the ipv6 ospf 6 area 34 command.
B. Under the interface Loopback6 configuration enter the ipv6 ospf 6 area 34 command.
C. Under the interface Serial0/0/0.34 configuration enter the ipv6 ospf 6 area 34 command.
D. Under ipv6 router ospf 6 configuration enter the redistribute rip RIP_ZONE include-connected command.
Answer: D
The certification of Cisco 300-135 exam is what IT people want to get. Because it relates to their future fate. Cisco 300-135 exam training materials are the learning materials that each candidate must have. With this materials, the candidates will have the confidence to take the exam. Cisco Certification 300-135 TSHOOT real exam questions in the Passtcert are the best training materials for the candidates. With Passtcert Cisco Certification 300-135 TSHOOT real exam questions, you will pass the exam easily.
The IT professionals and industrious experts in Passtcert make full use of their knowledge and experience to provide the best Cisco Certification 300-135 TSHOOT real exam questions for the candidates. We can help you to achieve your goals.With the arrival of the flood of the information age of the 21st century, people are constantly improve their knowledge to adapt to the times. But this is still not enough. In the IT industry, Cisco 300-135 exam certification is the essential certification of the IT industry.Related article: http://300-070-real-qa.blogspot.com/2017/09/update-troubleshooting-and-maintaining.html
Comments
Post a Comment