100% Valid | Cisco CCNP Data Center 300-180 DCIT dumps
After training they can not only quickly master a lot of knowledge, but also consolidate their original knowledge. So they can easily pass Cisco certification 300-180 exam and it is much more cost-effective for them than those who spend a lot of time and energy to prepare for the examination.Passtcert provide you with the comprehensive Cisco 300-180 exam information to help you to succeed. Our Cisco CCNP Data Center 300-180 DCIT dumps are the latest study materials which bring by experts.
Share some CCNP Data Center 300-180 exam questions and answers below.
A customer is configuring SAN pin groups in a Cisco UCS domain. The customer notices that pinning is not working and traffic from the vHBA is not passing over the Fibre Channel uplink port.
Which of these must be done for pinning to work correctly?
A. Include the SAN pin group in a vHBA policy and then include the vHBA policy in the service profile that is assigned to that server.
B. Include the SAN policy in the Cisco UCS Manager to match with pin groups on the fabric interconnect.
C. The customer must have Cisco UCS Manager version 2.0 or above.
D. Fibre Channel switch mode needs to be configured first.
Answer: A
Which statement is true about system event logs?
A. By default, they require manual clearing.
B. They report operating system crashes and errors.
C. They are also referred to as system error logs.
D. They can only be accessed from Cisco UCS Manager.
Answer: A
How will the Cisco UCS Manager react when all of the FSM tasks fail?
A. retries for 60 seconds
B. raises faults and alarms
C. restarts from the previous known good task
D. sends an NOC SNMP trap email
Answer: B
During a password recovery of a Cisco UCS system in a cluster configuration, what happens to blade traffic?
A. There is no interruption to traffic, as the fabrics go down one at a time.
B. Traffic stops flowing until the process is complete.
C. There is no interruption to traffic because both fabrics stay up the whole time.
D. Traffic will continue to flow, but at a limited rate until the process is complete.
Answer: B
A customer is configuring the dynamic vNIC connection policy in a Cisco UCS domain.
Why is the dynamic vNIC policy required?
A. It is only required if you are configuring VM-FEX.
B. It is only required if you are configuring Adapter-FEX.
C. It is mainly for the Cisco UCS Manager to communicate with the fabric interconnect.
D. It is required for Cisco UCS instances that include servers with VIC adapters on which you have installed VMs and configured dynamic vNICs.
Answer: D
Which commands can you enter to see if a component in the Cisco UCS domain generated a core file?
A. 6100-A# scope monitoring
6100-A /monitoring # scope sysdebug
6100-A /monitoring/sysdebug # show cores
Core Files:
Name Fabric ID
---------- ---------
B. 6100-A# scope sysdebug
6100-A /sysdebug # scope monitoring
6100-A /sysdebug/monitoring # show cores
Core Files:
Name Fabric ID
---------- ---------
C. 6100-A# scope system
6100-A /system # scope monitoring
6100-A /system/monitoring # show cores
Core Files:
Name Fabric ID
---------- ---------
D. 6100-A# scope cores
6100-A /cores # show cores
Core Files:
Name Fabric ID
---------- ---------
E. 6100-A# scope logging
6100-A /logging # scope monitoring
6100-A /logging/monitoring # show cores
Core Files:
Name Fabric ID
---------- ---------
Answer: A
But selecting Passtcert Cisco CCNP Data Center 300-180 DCIT dumps allows you to spend a small amount of money and time and safely pass the exam. I believe that Passtcert is more suitable for your choice in the society where time is so valuable. Moreover, our Passtcert a distinct website which can give you a guarantee among many similar sites. Choosing Passtcert is equivalent to choose success.Before you decide to buy Passtcert Cisco CCNP Data Center 300-180 DCIT dumps, you will have a free part of the questions and answers as a trial.
Passtcert Cisco CCNP Data Center 300-180 DCIT dumps are the best things to help each IT worker to achieve the ambitious goal of his life. It includes questions and answers, and is similar with the real exam questions. This really can be called the best training materials. Passtcert have a strong It expert team to constantly provide you with an effective training resource.
Share some CCNP Data Center 300-180 exam questions and answers below.
A customer is configuring SAN pin groups in a Cisco UCS domain. The customer notices that pinning is not working and traffic from the vHBA is not passing over the Fibre Channel uplink port.
Which of these must be done for pinning to work correctly?
A. Include the SAN pin group in a vHBA policy and then include the vHBA policy in the service profile that is assigned to that server.
B. Include the SAN policy in the Cisco UCS Manager to match with pin groups on the fabric interconnect.
C. The customer must have Cisco UCS Manager version 2.0 or above.
D. Fibre Channel switch mode needs to be configured first.
Answer: A
Which statement is true about system event logs?
A. By default, they require manual clearing.
B. They report operating system crashes and errors.
C. They are also referred to as system error logs.
D. They can only be accessed from Cisco UCS Manager.
Answer: A
How will the Cisco UCS Manager react when all of the FSM tasks fail?
A. retries for 60 seconds
B. raises faults and alarms
C. restarts from the previous known good task
D. sends an NOC SNMP trap email
Answer: B
During a password recovery of a Cisco UCS system in a cluster configuration, what happens to blade traffic?
A. There is no interruption to traffic, as the fabrics go down one at a time.
B. Traffic stops flowing until the process is complete.
C. There is no interruption to traffic because both fabrics stay up the whole time.
D. Traffic will continue to flow, but at a limited rate until the process is complete.
Answer: B
A customer is configuring the dynamic vNIC connection policy in a Cisco UCS domain.
Why is the dynamic vNIC policy required?
A. It is only required if you are configuring VM-FEX.
B. It is only required if you are configuring Adapter-FEX.
C. It is mainly for the Cisco UCS Manager to communicate with the fabric interconnect.
D. It is required for Cisco UCS instances that include servers with VIC adapters on which you have installed VMs and configured dynamic vNICs.
Answer: D
Which commands can you enter to see if a component in the Cisco UCS domain generated a core file?
A. 6100-A# scope monitoring
6100-A /monitoring # scope sysdebug
6100-A /monitoring/sysdebug # show cores
Core Files:
Name Fabric ID
---------- ---------
B. 6100-A# scope sysdebug
6100-A /sysdebug # scope monitoring
6100-A /sysdebug/monitoring # show cores
Core Files:
Name Fabric ID
---------- ---------
C. 6100-A# scope system
6100-A /system # scope monitoring
6100-A /system/monitoring # show cores
Core Files:
Name Fabric ID
---------- ---------
D. 6100-A# scope cores
6100-A /cores # show cores
Core Files:
Name Fabric ID
---------- ---------
E. 6100-A# scope logging
6100-A /logging # scope monitoring
6100-A /logging/monitoring # show cores
Core Files:
Name Fabric ID
---------- ---------
Answer: A
But selecting Passtcert Cisco CCNP Data Center 300-180 DCIT dumps allows you to spend a small amount of money and time and safely pass the exam. I believe that Passtcert is more suitable for your choice in the society where time is so valuable. Moreover, our Passtcert a distinct website which can give you a guarantee among many similar sites. Choosing Passtcert is equivalent to choose success.Before you decide to buy Passtcert Cisco CCNP Data Center 300-180 DCIT dumps, you will have a free part of the questions and answers as a trial.
Passtcert Cisco CCNP Data Center 300-180 DCIT dumps are the best things to help each IT worker to achieve the ambitious goal of his life. It includes questions and answers, and is similar with the real exam questions. This really can be called the best training materials. Passtcert have a strong It expert team to constantly provide you with an effective training resource.
Comments
Post a Comment